FlexFast™ CLCS

The CenterLine FlexFast™ CLCS (CenterLine Control Solution) configured stationary welder is a compact, versatile, welding machine designed for production fastener welding applications. This design includes many standard features that ensure the FlexFast™ CLCS produces consistent weld quality, is easily operated, and has minimal maintenance requirements.

The FlexFast™ CLCS offers:

  • Exceptional part quality at a competitive cost
  • Solid construction, capable of welding fasteners up to 13.3 kN (3000 lbs) weld force
  • Ability to weld up to M10 sized fasteners – application/fastener dependent
  • One (1) or two (2) OHMA™ air/oil weld actuator(s) with configurable fixed spacing

    • Low impact, “soft-touch” operation to minimize electrode wear, deflection, and part deformation. This promotes higher-quality welding and lower maintenance needs.
    • Four schedules available per cylinder
    • Accurate control over weld forces over a wide range of air pressure settings

  • Interchangeable lower tooling enables rapid changeover for multi-application needs
CLCS-FlextFast-Lite-Unit

CLCS HMI Features

  • Reduced cost compared to a PLC and standard HMI while maintaining high quality and safety
  • Wi-Fi “over-the-air” updates for firmware, if required
  • No PLC programming required, equipped with controller and HMI pre-programmed functionality
  • No software license fees are required
  • Upper and lower electrode weld counters for maintenance notifications
  • Weld control, with discrete interface
  • Dynamic high-resolution touch screen
  • Discrete control of up to 2 feeders
  • Active in-process weld monitoring

FlexFast™ CLCS Models

Standard

  • One (1) OHMA™ weld cylinder with LPT and manual regulator and air pressure switch
    • One (1) VeriFast™ LVDT weld body, upper barrel adapter
    • 100 KVA MFDC weld transformer, 400 amp WTC weld control (Bosch optional)
    • CLCS Controller, offers control of the machine sequence and up to two feeders, four (4) schedules available per cylinder, upper and lower electrode weld counters for maintenance notifications
    • CLCS controller also includes LVDT, LPT programming (similar to MicroView™)
    • Water saver and flow monitoring
    • Full guarding and 900 mm light curtain
  • Add Ons
    • 160 KVA MFDC Weld Transformer
    • Transformer mounting plate, spacer block and associated hardware
    • 600 Amp, 460 vac or 800 Amp, 575 vac WTC MFDC Resistance Weld Control Weld control panel with integrated CLCS controller and associated hardware Bosch weld control optional
    • Quick Change Upper Adapters QC Upper adapter set
    • Added water flow switch to confirm connections are made after
    • Oil Pressure Monitoring and Programmable Regulator
    • Programmable regulator controlled by the CLCS Weld force monitoring of intensification fluid pressure of OHMA™ Cylinder
    • 120 V Transformer for Fastener Feeder Power 3 KVA transformer and all related fusing and terminals
    • Operator Convenience Package (must include Feeder Power above)Overhead LED lighting package with switch receptacle
    • Operator fan with switch

Model N

Model N

  • Model N
    • Narrow – Upper arm and lower knee with 152 mm x 300 mm tooling platen
    Add Ons
    • One OHMA™ Cylinder only

Model W CLCS

Model W

  • Wide – Upper arm and lower knee with 152 mm x 460 mm tooling platen
Add Ons
  • Second OHMA™ Cylinder OHMA™ cylinder and control valves, safety valve, manual regulator LPT and LVDT weld body (Signal Conditioners are part of the CLCS) Upper barrel adapter, shunt adapters and related copper

For more information, please Contact Us.

Related Documents

Product Literature
TitleFile TypeFile SizeDownload
CLCS FlexFast Lite Brochure Ver 3_0-June 2021pdf578 KB

Contact Us

We aim to provide timely responses to all inquiries, aiming to address your questions and requests as quickly as possible. Your satisfaction is our priority, and we look forward to assisting you.